 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I recently replaced my hot water heater, basically same capacity, etc. as the previous heater. I am noticing a drop in water pressure in the entire house, guess would be 20-25%. The only change is I used a dielectric union between the new heater and copper pipe. I have to assume the water heater...
I have the same problem with hot water pressure loss. 50 gal gas power vent ( american hwt ). The only thing different is the dielectric unions. The nipples on the tank do have a blue plastic lining on both sides. Also, I have 1/4 turn ball valves on both hot and cold sides of the tank, which is...
Hello everyone, I have a question involving my plumbing. I was having terrible water pressure and I checked the pressure at the pump itself and it was great. Went to the pressure tank and it was trickling. Shut down power to pump and drained system - checked air pressure and it was not...
After the installation of a new hot water tank, we have less pressure which is only noticeable when trying to fill the tub. Any ideas? Thank you.
I've recently been losing water pressure as the pressure tank drains to the pump cut-in. the switch trips, but there is a delay of 2-3 secs before the pump is able to recharge the tank. I've checked the tank pressure a few times. It always reads ~28# or whatever I've pumped it up too. The tank...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
