 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kitchenaid Dishwasher KUDP01FLSS2: motor humming during cycle
I took the motor out and cleaned everything out (thinking maybe something got wedged) put it back in, did the diagnostic (toggled between the two buttons until all lights come on), let it complete the diagnostic and then tried to run it but the motor would start humming after the basin was filled with water. Do I need to replace the motor? Does anybody have any thoughts about why its doing this, to me it sounds like the motor is hung up.
|
||||
Check out some similar questions!
KitchenAid Dishwasher KUDS02FRSS1 The machine fills with water when started and the spinning arms start to spray water. After a few minutes, the washer drains and starts to make an odd humming sounds until the very end. The dishes come out with a film/stains on them like soap was dispensed but...
How do you reset a kitchenaid kudp02frss2 dishwasher?
My 577-0 model has recently started making all sorts of loud noises. Nothing clunking, rather a steady loud noise during the wash cycles. It is normal when it fills with water, and when it drains. I cleaned out all the gunk/debris and ran it empty and still same steady amount of noise. The...
KitchenAid Dishwasher (M#KUDM01TJBS1) leaves suds in the bottom of tub and on dishes. I ran it empty and still has suds in the bottom.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
