 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Intertherm MMHB-056ABHR-06 fails to fire up
The furnace does not ignite. Is there a thermo couple in side the fire box on this unit and how can I test it? Or could it be the electrical control unit? How can I trouble shoot these to see which has failed. That's what I would check first. Am I on the right track here?
|
||||
Check out some similar questions!
I woke this morning the circulator on oil furnace was running but was not igniting. Shut switch off then back on same scenario. I then checked the coupling on oil pump to make sure was not broken, last furnace had that problem, checked nozzle was clean, put everything back together turn switch and...
HI, When I turn it on , I get two flashes on red light. Will not start up. Thank you.
Red light on the black box flashes 2 times and it says that it is not receiving signal from the central fusical switch not opening up in time
Getting flashing light two times-indicates that control ion lockout due to signal not received by control that inducer pressure switch not closed n time, please help! p.s recently replaced ignightor and thermostat
The furnace igniter fails to fully light the furnace. If I turn off the frurnace, then the igniter will fully work properly. Does theigniter need to be replaced?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
