Ask Experts Questions for FREE Help !
Ask
    meme53's Avatar
    meme53 Posts: 4, Reputation: 1
    New Member
     
    #1

    Jan 1, 2013, 08:47 PM
    Goodman Heater
    If the that is metal expansion (plenum) I hear before the fan comes on, is this something that can be corrected?

Check out some similar questions!

Goodman heater problems [ 1 Answers ]

The fan works and I can smell a small amount of gas but the furnace will not light. I have turned off all power and then the switch on the igniter and turned back on power and igniter switch with no change. Can anyone suggest a solution.. . The house dropped to 40 last night!!

Goodman heater [ 2 Answers ]

My heater starts to blow air only, when the pilot turns on and the flames start to burn it the flames turn off right away. It does it over and over again it never warms up the house. What can this be?

Goodman Gas Heater [ 1 Answers ]

Goodman Heater runs and shuts off periodically.. Pilot lights and burns for 5 seconds and shuts off. Blower runs, pilot lights and burns for 5 seconds and shuts off.. Cycle repeats 3 or 4 times and then furnace shuts off. I then have to pull fuse and replace and process starts again. After 2 or...

Goodman Heater [ 1 Answers ]

My heater kicks on for about 15 seconds then turns off and the fan runs indefinitely, after a while the heater will kick on again and the same thing repeats. Meanwhile cool air from the fan is blowing in the house and the temp on the thermostate gets lower and lower. I've tried turning off the...

Goodman Heater [ 1 Answers ]

We have a Goodman Heater, GMT Series, that recently started to sound like it is struggling to turn on. The LED blinks three times when it is struggling and the panel says that according to the blinking, we should check venter pressure switch or vent blockage. It was eventually starting and would...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.