 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Gas valve model36c03
I need a diagam of coleman evcon model36c03 furnace gas valve.3 prong.Diagram from wiring to relay.We went from electronic ignite to gas valve pilot light.To wire it in diagram.The pilot light stays lite but,the burner won't ignite.Thebrown wire is hooked up to relay valve.Yellow is to everty on valve to relay.Could you please tell me were the third wire will go when convertin them?
|
||||
Check out some similar questions!
I have a Comfortmaker II 80 & Eff. Furnace installed in 1996 It has served m e well since I bought the house but then last year I had some problems as it began to shut down randomly. I had two different reputable companies out that I had look at the unit, these " Certified Professionals" each gave...
I have a Heil Natural Gas Furnace with smart valve sv9541 that goes off and the valve click as the ignitor glows on and off while lighting the pilot light which then goes out, and back lit?Is this a flame sensor problem? Thanks for advice.
I have an older Carrier natural gas furnace (1970s). Pilot doesn't stay lit. New thermocouple didn't help. Repair man says I need a new gas valve, $700 plus install, suggests replace entire furnace. Can I replace valve with universal valve and save $$?
I have seen gas water heater " install kits" that use the yellow flex appliance line for the gas connection to the gas valve on the water heater. My tank was installed when the house was built and has black iron pipe all the way to the union and into the valve on the tank. I have heard some codes...
I have a carrier 58gs100ga furnace with a white rodgers 36e93 gas valve. The main gas valve solenoid chatters or rattles for a split second before it stays engaged after the pilot is proved. I just replace the spark/lock out board and the fan board for a different problem. This chatter is...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
