Ask Experts Questions for FREE Help !
Ask
    abuhabbasi's Avatar
    abuhabbasi Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 1, 2013, 12:53 AM
    Can we operate supercritical boiler on heavy furnace oil with high sulfur contents 4.
    Can we operate supercritical boiler on heavy furnace oil with high sulfur contents up to 4.5% and final superheater steam temperature 565 degree C.

Check out some similar questions!

Oil Furnace boiler leaks ? Repair or replace? [ 5 Answers ]

Hi and thanks to those who read and respond to my post. I think the oil furnace boiler is leaking water internally. I did my spring furnace clean, and found the soot in the bottom of the boiler inside was moist. Before, inside was VERY dry and easy to vacuum. Soot does not smell like fuel...

Is it worth upgrading to a high efficiency oil furnace ? [ 2 Answers ]

Hi, I have a few questions regarding furnace replacement. First an overview. I live in Quebec, Canada. I have a "Lincoln" oil furnace, installed 20 years ago It works well, I have no complaints. I also have a heat pump, manufactured by "Heil", installed in 2000, again, no problems or...

Low PSI and temp on oil burning furnace w/boiler [ 1 Answers ]

I live in a two story very old house. The furnace is an oil burning and uses water to heat. This winter I can get the upstairs to stay near 70 but the downstairs barely gets above 50. I have been told there are two zones but that doesn't help me figure out why one zone heats and one doesn't. I...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.