 |
|
|
 |
New Member
|
|
Dec 31, 2012, 04:05 PM
|
|
Humidifer question
I have a Goodman GMVC95 furnace, installed a few weeks ago. I also have a separately controlled Aprilaire 224 humidifier with it's own 24v transformer. The technician installed the furnace leaving the single stage thermostat. I bought a multistage thermostat - Robertshaw 9025i, which also has humidity control. I would like to eliminate the old Aprilaire manual humidistat and utilize the control built into the Robertshaw thermostat. Can you advise me on how to configure the connections?
|
|
 |
Plumbing Expert
|
|
Dec 31, 2012, 04:28 PM
|
|
Between the furnace, humidifier, and thermostat instructions you should be able to get it hooked up. Just a matter of a bit of reading and comprehending what you read to make it all work. However, I would suggest having the original installer of the equiptment come do it to give you a little peace of mind.
|
|
 |
Ultra Member
|
|
Dec 31, 2012, 04:56 PM
|
|
I suggest you remove & discard the humidifier. If you need the extra humidity get a free standing humidifier. Furnace connected humidifiers are some of the worst things you can use due to furnace damage as well as creating an environment for mold.
|
|
 |
Plumbing Expert
|
|
Dec 31, 2012, 05:10 PM
|
|
I have to respectfully disagree, Grady. A properly installed and maintained (maintenance is key) whole house humidifier can do wonders in extremely dry climates. Absolutely no more of a mold or damage issue than a central a/c system is.
|
|
 |
Ultra Member
|
|
Dec 31, 2012, 05:52 PM
|
|
No offense taken or intended.
Maybe things are different in your neck of the woods but around here, there are VERY few which don't cause more trouble than they cure. The evaporative grid type foul rapidly & are usually beyond cleaning due to silicate build up, steamers burnout elements for the same reason, & spray misters rot out heat exchangers due to the nozzle getting crapped up.
|
|
 |
Plumbing Expert
|
|
Dec 31, 2012, 06:16 PM
|
|
Can't argue with your logic. In my area, it gets so dry in the winter months that whole house humidification is the only real cure. We use the evaporative grid type, but are very, very strict on checking and changing of filters. I agree, a whole house system can make for major issues, but in our area, people are taught to check their humidifier filter/system as often as they check and change their furnace filter.
|
|
 |
New Member
|
|
Jan 1, 2013, 12:01 PM
|
|
Thanks all for your advice. I'll reach out to the furnace installer. The humidifier was there when we bought the home 12 years ago.
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Whole House Humidifer, not working correctly?
[ 0 Answers ]
Here are the facts about my home and sytem:
Location: Indianapolis, IN
Furnace: Forced air gas (Located in garage)
Humidifer: Aprilair 500 series (Connected to hot water, electronic controller)
Home: About 1500 Sq Feet (2story + basement)
I had the humidifier installed in November...
Furnace/humidifer
[ 2 Answers ]
I am getting white dust from my furnace/humdifier, what can I do?
Vicks Cool Mist Humidifer
[ 3 Answers ]
Hi, I have just bought a cool mist humidifer for our bedroom mainly because my 19 month son has a stuffy nose a lot.
We haven't long been in the property we are in, so there are no bedroom carpets down yet, the walls are painted and wooden floorboards.
We used the mister on the first night we...
Need to wire a humidifer to the blower on the furnace
[ 2 Answers ]
I an trying to install a honeywell 360 humidifier on a Trane xb90 furnace. I have completed the installation but the sail switch does not operate very well causing my considerable distress.
I would like to wire the control for the humidifier to the blower on the furnace so that when the blower...
View more questions
Search
|