Ask Experts Questions for FREE Help !
Ask
    baulbet's Avatar
    baulbet Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 30, 2012, 02:04 PM
    My luxaire furnace pressure switch close open
    What do I do to correct the pressure switch open problem on my furnace
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Jan 5, 2013, 09:29 AM
    If you are talking about the make-up air fan and sensor it depends on what the problem is. Something causes the switch to stay open. It could be that the fan has come apart from acids. Check fan and motor, first.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pressure switch stuck open Luxaire furnace [ 1 Answers ]

I have a luxaire high efficiency furnace made in 1994 that is getting the error code for the pressure switch being stuck open. I took the rubber hose off to make sure it didn't have any holes or was clogged and then used a paperclip to clean out the connection by the fan, but it is still flashing 3...

80% luxaire pressure switch opens after 8 minutes [ 4 Answers ]

Opens for 1 second and resets just as quick and then loses vacuum from .9 to .6 in another 4 minutes and repeats, added new switch and new press hose still doing it, pulled vent pipe and still doing it, stopped main blower in mid-cycle and still trips, vent mtr. Pulling normal amps, possible weak...

I have a luxaire trouble code flashing limit switch open [ 2 Answers ]

The furnace seems to start up small fan starts OK the flame lights then the gas shuts off and the flash code flashes 4 times (limit switch open)??

The Open Pressure Switch did not close. [ 1 Answers ]

The Open Pressure Switch did not close, how can I locate the switch to resolve the problem? Also the unit is a York system.


View more questions Search