Does a 240V noma convection heater work with the 110V outlet?

aidanram Posts: 1, Reputation: 1

New Member

Dec 27, 2012, 11:39 PM

Does a 240V noma convection heater work with the 110V outlet?

I have a noma bathroom convection heater with model 52-2598-2,

smoothy Posts: 25,490, Reputation: 2853

Uber Member

Dec 28, 2012, 05:50 AM

No... if you have a 240v heater you need it to plug into a 240v outlet.

Add your answer here.

Check out some similar questions!

Installing a Noma Convection Heater 1000 w [ 6 Answers ]

Another question... I want to install a 1000 watt Noma convection heater where my baseboard heater was. From the wall I have a black wire, red wire and a bare wire which I assume is the ground wire. From the heater I have a Yellow wire, a red wire and a black wire. Am I correct in assuming that...

Noma fan forced wall heater 240v [ 2 Answers ]

I am trying to install these wall heaters, I have a standard 200amp panel and have a sub panel of 60amps which I am powering a small suite with, a double 20amp is hooked to 12/2 then to the heater I installed the heater as the diagram states and it does not work. I have tried every config, and...

Easier way to convert regular (assume 110v outlet) to 3 flat prong 125v/250v outlet? [ 3 Answers ]

I bought an electric clothes dryer thinking it would work with the regular outlets in apt. However, and no wonder the guy left in a hurry and got angry when I asked to return it, get money back, the end of the dryer plug is 3 flat prongs, with a sticker that says it is 125v/250v. Without rewiring...

110v to 240v converter [ 10 Answers ]

I have a kitchen appliance which is rated as 240V,50HZ,750W which I brought it from India. What type (and capacity) of voltage converters I would need to use it in the US. I presume my wall outlet is rated 110v/120v; Where can I buy these voltage converters? Any retail store or online...

Wiring 240v wall heater to a 3-prong dryer outlet? [ 7 Answers ]

Hello - I am installing a 240V wall heater in my basement. I want to plug it directly into the existing 3-prong 240V outlet that is used for the dryer. I have run the 10/2 wire (two hot and a ground) from the heater to the outlet, but need some help figuring out how to hook this up. From what...