Ask Experts Questions for FREE Help !
Ask
    Jay2004's Avatar
    Jay2004 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 22, 2007, 08:39 AM
    Lawen chief 520 rider mower
    I would like to what size belt for a lawn chief riding mower, model 520. Has a 12.5 engine.
    And is a 43" blade cutting swath. Can someone please help
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Mar 22, 2007, 11:42 AM
    I pulled this from another site. This person has a similar situation and here was the response. "Hmm.. this would be a very long shot.. but try calling Gulf Coast Engines at 800-825-6999 during the day. They MIGHT be able to find it in some old data. And you can order the part from them IF they have it. They used to be a distributor for Murray, and I am not sure if Murray or MTD bought out the Lawnchief stuff. I think it was made by GeneralPowerEquipment.. but who knows what happened to that company."
    Many brands of mowers are made by only a few manufacturers. MTD may be of some help, they make tons of this equipment. Any chance you have the old belt?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftman rider mower won't cut [ 7 Answers ]

I have a craftman rider that I changed the belt and blades and it won't cut. Blades slows or stops when high grass is met. Doesn't sound like it used to. Any idea from someone with more knowledge than me.

Lawn Chief riding mower [ 6 Answers ]

Two wires got disconnected from our riding lawnmower. I need to know where the 2 red wires are supposed to go. The longer red wire is hooked to the key or kill switch and the shorter red wire is hooked to the solenoid. I think the shorter wire is for ground. The mfg. # is 0048 and the model # is...

Lawn chief mower won't start [ 3 Answers ]

Have a lawn chief mower that won't start. I think it is the ignition switch and not the connectors behind it. When I turned the key to run the light came on but wouldn't turn over like it did minutes before. I probably would have a hard time finding a replacement ignition switch. My question would...

Lawn chief 12/39 [ 1 Answers ]

I bought a lawn chief 12/39 used.The problem I am having is it starts very hard and I usually have to jump start it.When I do get it started.I can drive around all day without problems and it can also sit idle with the mower running but when both are engaged it stalls.It has a 12hp briggs engine in...

View more questions Search