Ask Experts Questions for FREE Help !
Ask
    madbadger's Avatar
    madbadger Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 27, 2012, 05:54 PM
    Will not fire
    When system calls for heat the ventor fan runs, but the ignitor w/not glow and the WR control gives four (4) blinks. Any ideas?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Dec 27, 2012, 06:10 PM
    Either on the control itself or somewhere on the furnace (often inside the blower compartment door) should be a key to the blink code.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Are liable for fire if someone visiting with you starts fire [ 1 Answers ]

My neighbours had a house fire that caught my house on fire and left us with damages. We had to pay the detucible of $500. The insurnce says that their insurance will not pay us back due to the fire was starting by a family member that was staying with them and they are not liable. The fire started...

No fire [ 2 Answers ]

I have a 95 honda civic with a 1.6 vetec,I have no fire at all replaced coil and igniter still nothing.should I try a hole this.I can hear the relay clicking under dash to so I'm sure its OK any help would be app.

Local fire reg vs state fire reg [ 3 Answers ]

California state law requires 100 feet of vegetation clearance with 30' cleared and 70' reduced veg. The local fire district is saying all 100' must be cleared. Can the local regulation be stronger than the state? Thank you for any help.

I'm on fire! [ 7 Answers ]

Ok well I'm not on fire my forehead is.. >!! What do I do if I burned my forehead with my hair straightner but I can't find any aloe!. I NEED HELP SOON!!

View more questions Search