Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
York furnace (GY9S/GM9S/GF9S) Not working - 3 Red flashes on Diagnostic
[ 5 Answers ]
Hi, We have a york furnace up in the attic to heat the bedrooms. We had a major wind condition one day and the furnace stopped working after that. It has the three red-light diagnostic red blinks, which means either the - Faulty pressure switch, broken pressure switch hose, blocked vent...
How to wire my greentek hrv to kicks on the furnace fan on low of a heil furnace?
[ 0 Answers ]
How to wire my greentek hrv to kicks on the furnace fan on low of a heil furnace? I had a airconditioner installed in August and for some reason they unhook my hrv so now the hrv turns on but doesn't request the furnace fan to come on. So now it's not circulating the air in my house properly. I...
XB80 Gas Furnace , furnace fires up fan turns on but no airflow in ducts
[ 2 Answers ]
Furnace fires up just fine, and fan spins but there is absolutely no airflow in duct work. Any ideas? Last spring thermostat went out and I replaced it, worked great. A month later circuit board burned out, tech found that problem and replaced it (major pocketbook ouch) and everything worked...
Bryant furnace showing code 12-blower on after power up. Furnace won't start. Why?
[ 0 Answers ]
Blower motor on all the time. No heat from furnace. Why?
Tran furnace / air main blower on furnace will not run. But the a/c unit runs
[ 0 Answers ]
Main blower on furnace, is not running, when thermostat calls for cooling the out side unit runs. The main blower on the furnace in not View more questions Search
|