 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Craftsman Model 358.797342 Leaf Blower has low compression
My Craftsman Model 358.797342 Leaf Blower would not start and I found that the headbolts had loosened causing the compression to be low. I tightened the bolts, the blower ran OK for a few minutes and suddenly quit. It had low compression again, but the head bolts were still tight.Compression is about 75 pounds. I had previously replaced the carburator, fuel line and filter. It has spark. Are there other things I should check for that might cause a sudden drop in compression?
|
||||
Check out some similar questions!
Craftsman model # 358.797180 fuel type?
[ 3 Answers ]
What is the gas to oil mixture ratio?
What is the gas oil ratio for craftsman blower vac 358.797290?
[ 1 Answers ]
Leaf blower instructions
Model 358.745300 Craftsman Weed Eater
[ 3 Answers ]
I bought this from an individual, and can't find this model on Craftsman.com. I need to know what line to buy. It isn't spool line, I know.
Leaf Blower Compression
[ 2 Answers ]
What is the compression for Craftsman Leaf Blower model 358797342
Need to know proper compression for Craftsman leaf blower mod # 316794970
[ 1 Answers ]
Blower has never started since it was given to the owner, and I'm trying to pick up some mechanical experience, so he gave it to me. 32cc 2-cycle, I've got spark, replaced the reed (support arm mysteriously chewed up when I opened it), cleaned the carb and spark arrestor screen, getting fuel to the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
