Ask Experts Questions for FREE Help !
Ask
    deevaldivia's Avatar
    deevaldivia Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Dec 17, 2012, 04:05 PM
    Intertherm Furnace Parts
    My Mother's mobile home Intertherm gas furnace was red tagged by the gas company and it says: pilot button leak at control box. I need help badly.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Dec 17, 2012, 05:48 PM
    Pilot button would be located on the gas valve. If that area of the gas valve is leaking you will need a complete new gas valve. You will need to contact a local hvac company to come make repairs. Once the unit is red tagged by the gas company, you don't have much choice but to call in a pro. Sorry, but you best get this taken care of quickly because your furnace ductwork in the belly of the trailer is what keeps the water pipes from freezing if it extremely cold outside. I wish you the best of luck with this, but there is no do it yourself fix.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Intertherm furnace codes? This furnace flashes the yellow light 6 times [ 0 Answers ]

Furnace will run for 30 seconds. It shuts down and the yellow light will flash 6 times and the does the same thing over and over. Red light stays steady. Thanks for the help.

Intertherm furnace parts [ 1 Answers ]

I have replaced our themostat three different times. This winter, but come to find out it is the switch that makes the fan turn on manual or auto there seems to be 4 wire connecting to it. You have to bump it sometimes to make it come on . It looks like a rocker switch to me what exactly is it...

Intertherm furnace parts [ 1 Answers ]

What is the rocker switch called that you can turn it on auto or manual and controls the thermostat?

Intertherm furnace e2eb-017hb runs briefly, shuts off, then furnace just clicks [ 3 Answers ]

I have an Intertherm furnace, e2eb-017hb. It comes on briefly, blows warm air, then shuts off, and a clicking sound comes from the coil contacts area. I have tested the t-stat, and also replaced a coil contact, thinking that was the problem. I would appreciate any help on what to do next.

My intertherm furnace pilot lights but furnace won't kick on [ 5 Answers ]

I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...

View more questions Search