Luxaire model number location

whitt Posts: 1, Reputation: 1

New Member

Dec 16, 2012, 08:37 AM

Luxaire model number location

Location of model number

Grady White Posts: 1,417, Reputation: 59

Ultra Member

Dec 16, 2012, 08:02 PM

Usually in the burner compartment but could be a sticker or plate on the outside of the cabinet in the area of the burner(s).

Add your answer here.

Check out some similar questions!

Name of my furnace is LUXAIRE Model No P2UDD16N11401C me know please. [ 3 Answers ]

Name of my furnace is LUXAIRE Model No P2UDD16N11401C about 18 years old. I would like to know if I have a flame sensor in this furnace. Thanks let me know please.

Luxaire Furnace Model #G9F08016UPC13C [ 2 Answers ]

Blower works, filter is clean. Hot Surface Ignitor glows, burners ignite for 15 seconds, then cuts out. This cycle happens for (3) times. Fault code then blinks (7) times. According to book it means one of (3) things: a) low gas pressure (however my other furnace works fine), b) faulty gas...

Craftsman II g4000 model number location [ 2 Answers ]

Where can I find the model number, found the model to the catcher which is 917.249670. It's a 42", sticker under seat is worn off, need drive belt for it, thanks

Luxaire furnace Model# G9T08012UPB13C [ 2 Answers ]

6 years old. Blower runs, ignitor glows, natural gas valve clicks but no flame. Blower remains on ignitor glows & cycles 3 times but never fires. Is it the ignitor (not hot enough) or the control valve? I've got a Simpson meter but don't know what values I'm looking for.I had same problem with a...

Luxaire model bata-f036ad [ 1 Answers ]

I need to find specs on this unit I bought it used and need to know what the BTU ratings are