Ask Experts Questions for FREE Help !
Ask
    amb89's Avatar
    amb89 Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 14, 2012, 05:26 PM
    Meter sockets two gang 200 amp 7 jaws
    Poly phase meter base is already there. Need to remove and place two gang meter poly pahse .
    Does any body knows where to get two gang (or position) meter phase 7 jaws 200 amps.
    Cx cannot run separate under ground service for second meter.

    Need answers any body?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Dec 14, 2012, 05:50 PM
    Any real supply house can get this for you.
    Are you an electrician?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring 2 Gang Meter Socket w/ 100 & 200 Amp Meters [ 10 Answers ]

Hello, Are you allowed to use a 2 gang 200 amp meter socket to feed (1) 200 AMP panel and (1) 100 AMP panel, or do all meters in same enclosure have to be the same (200 AMP)? If the above is allowed: What size wire would I need from weather head to meter socket? Would I then run...

60 AMP feeder line to meter and from meter is 200 AMP wire to my electrical box. [ 13 Answers ]

I have a old 60 AMP feeder line from the top of my house to the meter. From the meter is 200 AMP new wire. I was wondering if this is even safe and what would the cost be of updating the feeder line?

400 amp service, 2 200 amp panels, 320 amp meter socket [ 10 Answers ]

Hi, this is my first post here, but I have been reading a lot and have already learned a bunch. I want to thank TK already and hope you reply to this. I am in the process of designing my electrical system for my new home. I have some electrical experience, but am by no means a pro. I am...

Running 2 100 amp breaker boxes on 200 amp meter base [ 1 Answers ]

I have 2 100 amp breaker boxes,but the meter base is 100 amp.Wanting to put 200 amp metet service with disconnect box.Can some one tell me if this is possible.and how you would connect the 2 breaker boxes to the disconnect box.Thank you

2 200 amp disconnects and a 200 amp meter [ 3 Answers ]

On a new house I have 2 200 amp panels on the inside. What will be the best way to hookup the 2 200 amp outside disconnects and meter to look decent for the house?:o


View more questions Search