Ask Experts Questions for FREE Help !
Ask
    OwnNewNextTime's Avatar
    OwnNewNextTime Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 21, 2012, 05:47 PM
    Corian bathroom lavatories replacement overflow piece?
    I have a corian sink... The pop-up drain lever broke off... What I have learned so far is that the overflow on these sinks come with sink when purchased... I cannot find a replacement piece... When we bought the house there was no overflow attached at all. How do I fix this or get a replacement part? I've been to home depot and a local plumbing store who only for the clearanced corian sink on their showroom floor was I able to explain what I needed... The guy said he would call me back... I called him back and someone else gabe me a number to a corian distributer... The receptionist transferred me to the voicemail of the production manufacturing manager... There is no way this guy is going to call me back... He is not a customer service guy...

    I think I have a model 810 with front overflow. On the sink the label reads 'Label P.N. C75263-B' a schematic for ADA guidelines I found says it can have either pop-up or plug drain... Yet nothing will fit on it...

    The thickness of the corian at the drain is 1 cm so standard over flow pop-ups... Would leak if actually sealed.

    Help! This house has some doozies!
    sdstevep's Avatar
    sdstevep Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Dec 11, 2012, 01:58 PM
    The dupont website has some pdf files showing the parts detail for the 810 sink. There's a donut shaped piece that gets put at the bottom of the sink, an it has a pipe to which the overflow tube attaches. It's a horrible design if you ask me. I'm trying to find a new rubber washer for that donut. But anyway, once you have all the pieces a standard tailpiece will work.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gluing Corian sink overflow drain [ 26 Answers ]

What's the best kind of glue to use to reattach the overflow drain to the underside of a Corian bathroom sink? Gorilla glue didn't work.

My corian bathroom sink is stained and crazed around the drain. Can this be repaired? [ 2 Answers ]

I have a bathroom washbowl made of corian. It's 25 years old and has become crazed (has shallow cracks) around the drain and is stained brown. I've tried bleach on the stains, but it doesn't work. Can the crazing and stains be removed?

How do I cut a 5' piece of corian? [ 7 Answers ]

My piece of corian is now 5'x3' I want to cut it dow to 55"x25" It also has wood under the corian. Do I remove the wood or cut right through it? What tools do I need?

A guestion about my bathroom lavatories [ 4 Answers ]

In my master bath lavatory the hot water is not stable. I do have hot and cold water, but When I turn on the hot water the hot water is not stable hot. By the way I have gas water heater in a single family. You think it is because the water heater temperature or the element. Thank you

Vanity Staron (like Corian) Overflow drain lines [ 5 Answers ]

We are trying to install a new Staron double bowl lavatory vanity top. We have put in a Moen Asceri faucet with pop up drain. They have included a plastic adaptor for the drain to hook the overflow tube from the sink, and you put it between the sink underside and the tailpiece. It is white plastic...

View more questions Search