Ask Experts Questions for FREE Help !
Ask
    capbone's Avatar
    capbone Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 11, 2012, 10:48 AM
    Installed the thermostat the A/C works the heat says it
    Installed the honeywell thermostat A/C works fine, The heat says it's on when it's on auto but fan doesn't come on unless I switch from auto to fan, at which time the fan works but only room temperature air comes through.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Dec 11, 2012, 06:37 PM
    Are you telling us the fan does not come on in the heat mode? Does the heat come on?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No Heat, New Thermostat just installed [ 6 Answers ]

New thermostat installed, I have wired it based on the manual, 4 wires- W, are, G, why. I have done all the preset, but have no heat. I tried re-set the main breaker, and I have also checked the pilot on the furnace. Any help would be great. I have my house set at 21 C, and it is only 15 C right now

Rudd ac with heat pump it works as ac but not on heat Thermostat ? [ 0 Answers ]

Could it be the wrong thermostat the unit model uqka a030jk the heat pump 7f62 heater kitrxqj

Thermostat Heat works, A/C does not! [ 7 Answers ]

I have installed a Hunter Programmable Thermostat model 44660. The heating works fine, but the A/C does not work. According to the display, the air is running, but nothing is coming out of the vents. While I know that the wiring colors are not always 100% accurate, I have the wiring set up as...

Installed new Noma thermostat 52-2570-6 heat stays on [ 2 Answers ]

I bought this Noma thermostat and the heat stays on, no matter what. Even if I detach the front plate the heat remains on. When I reinstall the old mercury swtiched thermostat it works fine. I have a 2 wire hydronic heat system. Can anyone tell me why the heat stays on? Any advise will help....

New Thermostat installed, Fan works, No blowing air [ 1 Answers ]

I just installed a new thermostat (Ritetemp 8050c) onto a electric furnace and A/C unit. Connected the following wires to the corresponding terminals as the instructions showed (W1, R, Y, G, B) When I attempted to run the A/C I could hear things starting up but no air was produced. After a...

View more questions Search