 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I need to find a wiring diagram for a 79 techumseh 11 to 14 hp charging system
I have recently changed my contact point and condenser to my snowblower with Tecumseh Engine. After putting it back, no sparks. I changed also the spark plug and tried the other also, but still no spark. Not sure why no spark and if there is anything to ground. Someone says grounding and I don't...
I have a 5.0 horsepower Tecumseh engine. I used to be able to start the engine with the first pull after I primed the engine 3-6 times and the engine ran great. Now it takes me 4-6 pulls after priming, and I have run it in a lower gear to keep it from stalling. I wasn't sure what could be wrong?...
The HP is no more than 3 or 3.5. It has a horizontal shaft and a diaphram carb, I had problems with the carb flooding so I rebuilt the carb. The gas tank is slightly rusty inside. I managed to get the engine running smoothly and put it in the shed. About 2 weeks later, it started right away....
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
