Ask Experts Questions for FREE Help !
Ask
    crawford787's Avatar
    crawford787 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 19, 2009, 12:46 PM
    States select hot water heater
    Pilot light will not stay on after lighting
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Apr 19, 2009, 12:50 PM

    Replace thermocoupling.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #3

    Apr 19, 2009, 12:57 PM

    If your water has a piezo ignitor to light the pilot, I would guess that the filter on the water heater is stopped up.

    If this is what you have write me back and I will tell you how to clean it.
    dchurch's Avatar
    dchurch Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Nov 25, 2012, 01:24 PM
    I do not see a spark in the burner window ,and can I light it any other way or can I remove the window ?
    RobWynn's Avatar
    RobWynn Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Dec 6, 2012, 10:12 PM
    I am not sure if it is a piezo igniter or not but it is an electronic igniter.
    It does say that it has a filter that needs to be cleaned so that is probably the problem. Could you please tell me where to find it and how to clean the filter.

    Thank you
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

State Select Water Heater [ 24 Answers ]

Power direct vent water heater blower will not shut off. Plenty of hot water. Gas water heater. 75 gallons. State select model pr6 75n rvt. The blower is integral to the unit. I could not find the exact model number on the web site and did not find the problem under the troubbl shooting guide....

State Select hot water heater [ 1 Answers ]

I have a state select gas hot water heater with the blower. The GFI keep tripping and turning the heater off. I've replaced the GFI but still shutting off. I push the reset button and will do great for a few days then trip again. Any ideas?

State Select Water Heater [ 3 Answers ]

We have a state select power vent water heater. Last October it stopped working and the plumber replaced the ignitor as the wires had shorted out. Then it happened again in the beginning of January 2008 and he again replaced the ignitor. Well, our water heater stopped working again today and the...

State select water heater [ 1 Answers ]

My state select electric water heater,just stop working and I don't know how to bringing back to work,any ideas.

State Select Water Heater [ 1 Answers ]

I emailed Robershaw who's thermostat is on your water heater, and they said I had to ask you about it, as they design stats for different companies. The stat has hot - very hot on the right side of the dial. Even in the 'hot' setting, the water is too hot. On the left side of the dial are the...

View more questions Search