 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Sears craftsman riding mower troubleshooting
21 HP 46" riding mower (model 917.28852) - blades stopped turning while mowing a flat easy section. I checked the belt, it is not broken, but seems really slack. When I move the clutch lever there is no resistance, and nothing happens. Please help..
|
||||
|
||||
|
Hi,
I believe you must have left the last idgit off that model number. Should be a "0" or "2" from what Sears produced in the way of breakdowns. First I suggest that you check the cable to see if it has broken at one end or the other, or if something has wedged the idler arm that engages the deck. Put a picture of a page out of the owners manual for reference. Peace, Clarke |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
The engine cuts off after making several rounds of cut in the yard. It is like when it gets hot, it just shuts off an won't crank. I wait several hours, then it will start back up and then do the same thing. Have changed all the filters, spark plugs, etc... any ideas?
I have a craftsman 16hp, 42 inch cut riding mower with automatic transmission. The mower quit pulling, belts are good and have tried to purge the transmission of air with no luck...
I own a Sears Craftsman riding mower with a 42" deck. It's 17 horsepower. Every time I engage the blades, the engine cuts off. I can't seem to get the cover that is over the pulley on the left off. I've cleared dried grass from under the deck, and have applied WD 40 to the pulley wheels. The blades...
I need a diagram on how to replace a belt on the Sears Craftsman II 4000 riding mower
View more questions Search
|
