Ask Experts Questions for FREE Help !
Ask
    caseyman10's Avatar
    caseyman10 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2012, 11:28 PM
    Servo motors not running correctly
    We are using 4 servo motors to drive our robot. We have to go up an incline of 30 degrees. When going up the incline one side(either one) will stop working. Need help figuring out what maybe happening.
    hfcarson's Avatar
    hfcarson Posts: 1,003, Reputation: 49
    Ultra Member
    		  
    #2

    Nov 30, 2012, 11:06 AM
    Sounds like a rated power issue... that is the motors are not rated for the
    Load you are applying to them. See if you can prove this by either removing weight or reducing the incline.
    Then consider higher power motors, maybe increasing one on each side would work...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Power consumption of AC Servo motors in comparison of Induction motors [ 0 Answers ]

Can anybody tell if we uses higher torque AC Servo motors in CNC machines, will the power consumption will be more or it will depend upon its cutting load?

What is servo motors? [ 0 Answers ]

What is servo motors?types of servo motors with block diagram.

Servo motors [ 2 Answers ]

What is a servo motor for robots?:rolleyes:

Servo Motors [ 1 Answers ]

What is servo motors & what is working principle? How servo motor torque can be controlled? Type of servos? Difference in between AC & DC?

View more questions Search