Ask Experts Questions for FREE Help !
Ask
    Ed in Va's Avatar
    Ed in Va Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 22, 2012, 08:14 AM
    Toro Lawn Mower Repair
    I have a 2000 Toro recycler, Model 20028. It has a new plug, and I cleaned carburetor, but it is hard to start, takes several primes and several pulls on rope.

    Put new coil in it, but still works same way. I am not a small engine mechanic, but can do some repairs. The pull cord seems a little slack in it. Could the pull cord, not wound firmly, cause this? Thanks for your assistance.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Nov 22, 2012, 10:17 AM
    Several primes is not unusual. My weedwacker says. "push primer bulb 6 X". Slack rope pull may be more the issue. Some are easy to rewind. some are hard. Google "replacing pull rope on toro mower ".
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to repair toro lawn mower? [ 9 Answers ]

Model 20005 seems to die out after running for about 10 seconds. Starts fine, but always dies out. I cleaned The air filter and checked the spark plug and all looks well. Any suggestions?

Toro lawn mower repair [ 3 Answers ]

I was given a toro lawnmower it will start and then stop I have replaced the oring behind the carb and I have replaced the full line . It acts like it has a vacume lek but I do not know where it is

Diagram for replacing lawn mower belt on Toro 1744HXL riding mower [ 1 Answers ]

I need a diagram for replacing the belt in the mowing deck of a Toro 17-44HLX riding mower

View more questions Search