Ask Experts Questions for FREE Help !
Ask
    wiyo1989's Avatar
    wiyo1989 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 14, 2012, 04:23 PM
    Questions kenmore 700 series washer
    I have a kenmore 720 series fairly old and it won't spin automatically to drain water?
    outzie's Avatar
    outzie Posts: 4, Reputation: 1
    New Member
    		  
    #2

    Nov 16, 2012, 09:29 AM
    You said it won't spin automatically... will it spin if you advance the timer manually? Does the spin cycle work on another setting i.e. gentle setting, perm. Press? It could be several things, try adjusting the load so that the load is evenly balanced around the tub, even the slightest difference can cause a no spin. Another tip, make sure the legs are evenly adjusted so that the machine is level. Those are the simple solutions... It could also be that the timer needs replaced, not a terrible problem to resolve but start with simplest first.

    I was surprised to see no response on this one. So I hope this helps.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore 700 series washer [ 1 Answers ]

I only get cold water on both setting of the washer. No hot water at any time. Checked the hot water line no block. Switched lines can only get hot coming in from cold line.

What is the capacity of my Kenmore 80 Series Washer & 90 Series Dryer? [ 1 Answers ]

We are trying to figure out what the capacity is of our Kenmore Washer and Dryer that we purchased over 10 years ago in Canada. I can't find it anywhere on the machine or manual. The Model # of the Kenmore 80 Series Super Capacity Plus Washer is 110.4784292, Serial #CH0802766. The model # of the...

Kenmore 80 series washer [ 4 Answers ]

I have a kenmore 80series washer, and the center basket thing that holds the load is loose and is shaking violently. Is there any way to fix this? I've tried everything I could but can't remove the center spinner thing to get to the bottom. Thanks in advance for any help. WILL

View more questions Search