Check out some similar questions!
Had no water banged on pressure switch started working so changed out switch worked
[ 7 Answers ]
Had no water Friday night. Banged on switch sat morning and it starting working for a few minutes. Changed out switch sat. afternoon work until Monday morning. Now now water and the breaker is tripped. When I wired it up I put the two wires coming from pump one red and the other black on the two...
My gas furnace is not getting vacuum pressure for the pressure switch.
[ 1 Answers ]
All the hoses were replaced as well as the pressure switch it self. I can jump it and it fires right up. It's a Heil model. The pilot light lights automatic. If you take the hose off that goes to the pressure switch and suck on it, it switches and the pilot light lights off. I don't know much...
York residential furnace pressure switch problem code stuck switch
[ 1 Answers ]
I have a york furnace P2MD12H06401A after 1 hour it shuts down and gives a 2 flash error for a stuck pressure switch. The switch is new can it be wired wrong? The old one had 2 white wires piggy back and 1 blue wire. The new switch has 3 separate terminals
Deep well, pressure tank/switch not building pressure
[ 13 Answers ]
The only way I have water pressure is to leave the power on! I have replaced the 5 gallon pressure tank (28psi when void of water)/fittings/pressure gauge and tried 3 new 30/50 pressure switches and the problem remains the same. With the power off, the pressure drops to 0 (not 30). When I...
Goodman limit switch/pressure switch?
[ 2 Answers ]
Hi, I've got a goodman furnace (mod. # GHT070-3) it's about 5 years old. Recently, the heat will only kick on for about 30 seconds then shut off. It's giving me 4 flashes: Open limit switch, then it kicks off. After that it gives me 3 flashes and turns back on (pressure switch). It seems the... View more questions Search
Add your answer here.
|