 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Blower motor on my AC not working right
When I turn on the heat or AC the blower motor sometimes starts and other times it doesn't. If I pull the cover off and spin the squirrel cage by hand sometimes it will start up after getting it spinning. I can hear the relay kick in when I turn on the heat but sometimes it just won't start blowing. Does this mean that the motor is going out or could it possibly be something else? The unit is in a mobile home and it is a Nordyne model E2EH 015HA. The motor is 2 - speed, 3 ton 2.0 FLA 1/5 HP if that helps any.
|
||||
Check out some similar questions!
I just replaced my thermostat and wired it the same as the last. The furance fires up and the fan turns on but the blower motor doesn't turn on. Any suggestions?
We recently reconnected a 5 year old Coleman 2 ton outside package unit after installing new ductwork on a manufactured home that was recently purchased. The unit was working properly i.e. blowing nice cold air but stopped working that evening (6-8hr). The blower motor/fan is not working and the...
Hey all, Woke up nice and warm last night, upstairs ac had stopped working. Compressor outside is running, but no blower. Tried manually setting the fan from Auto to ON, nothing. Doesn't matter if I have it set to heat or AC. Using a Honeywell programmable thermostat, swapped the upstairs one...
Hi I have a bryant heat and air unit,fairly 10yrs old. I have replaced the motor in it once last year . The motor will not start ,I have checked the thermostat,fuse and breaker,all seem to be OK. Not sure about the capacitor. Can you help?
Our furnace fan blower motor is not working(quit). It doesn't run. It had a flat spot and my husband was able to get it going, but now it won't run at all. My question is will it be cheaper to fix it or to buy a new one and where can I find one? My husband is an electrician and probably can...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
