[yorkster]

I have this heat pump and did not come with heat strips. I want to add 1- 10kw and 1- 5kw heat strips. The evaporater unit did not come with a wireing diagram and I want to make sure I wire it to work with the heat pump or be able to run just the heat strips on emergency heat if wanted. This is why I am looking for wire diagram. Free seems like all sites want to charge for this info.

[hvac1000]

I have this heat pump and did not come with heat strips. I want to add 1- 10kw and 1- 5kw heat strips. The evaporater unit did not come with a wireing diagram and I want to make sure I wire it to work with the heat pump or be able to run just the heat strips on emergency heat if wanted. This is why i am looking for wire diagram. Free seems like all sites want to charge for this info.

The heat strips you will use has to be the heat strips from York for your unit. It is the only way to have a listed and labeled unit for code and safety purposes. The wiring diagrams are in the kits which usually include a circuit breaker and special mounting plates. The kits might cost a bit more BUT it is the correct way of doing things.