 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Grease all bearings with white lithium grease and you should be able to fix it. Sometimes you have to replace the support rollers, which are very cheap, to get rid of the noise. Make sure to check belt tensioner as it will get worn and make noise. You can get some oil and spray each roller until noise goes away. Then after finding bad roller or belt tensioner take dryer apart and replace or grease the part. I do not know if your model has a center drum bearing, but it has to have lithium grease every year when it's cleaned.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I took the back off and tried to get the silver looking panel off but could not. Doesn't it have to come off before I can take the element out? I can see the element casing but can't get to it.
My Kenmore Elite Oasis electric clothes dryer stopped mid cycle with the error code "F 40" flahsing. Have unplugged machine and tried several times with no luck - any suggestions?
The hot surface igniter glows lights the first time then runs for about 3 minutes then glows again in about 2 minutes shuts off with out lighting the burner, cleaned the vent out any ideas?thanks hixton
My Kenmore Oasis Elite Dryer at 14 months started beeping three times during drying and at random times in the middle of the night CF01, CF02, CF03. Has anyone heard of this problem? The tech has been out twice and now he says the circuit board must be replaced for $400.
Kenmore dryer does not heat. How do you replace heating element?
View more questions Search
|
