 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Sign of a bad furnace damper motor is not functioning properly
My boiler is shutting down into lock out mode, but I don't know what's causing it?
It will start on reset but shut down after a few minutes, but as of now it won't kick on at all. I checked the pilot and it is on and fine. I would like to know if this type and model has a flash code to tell what's wrong. By the vent there is some kind sensor/motor type setup that was making noise and now has stopped altogether. |
||||
Check out some similar questions!
I have a wireless non-roller mouse and a mouse receiver that connects to any of my USB ports. I have had problems with my mouse the last few days because the mouse eventually slows down and stops responding unless I press and hold the button on the mouse receiver itself. I have to click the left...
Dvd/cd writer is not recognising the cds ,it simply gives a message as "Please insert a disk".Can anyone has solution for this.its urgent...
My heater is set at 72 but the house is 58. My heater turns on for about 1 - 2 minutes and shuts off for 1 -2 minutes. This process is repeated until the desired temperature is reached. What could possibly be wrong?
My forced-air furnace is not working correctly. The gas works heating the air in the furnace, but When the motor starts the damper doesn't open and the Motor shut down. I need suggestions?:mad:
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
