 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Generator for Coleman Echelon 9.c furnace
After going through 5 days of no electricity from Hurricane Sandy and having a 1yr old come down woth a cold at the same time, I've decided to start researching into getting a generator that will power some appliances and my furnace. I have a Coleman echelon 9.c that was installed about a month ago. I'm thinking of having a direct connection to to the generator through the house breaker panel. I'm considering using one of these Interlock Kit (interlockkit.com). My question is what would be a good generator or what specification should I look for to be able to run the furnace? I'm considering both a propane or gas generator.
Thanks for you help! |
||||
Check out some similar questions!
After going through 5 days of no electricity from Hurricane Sandy and having a 1yr old come down woth a cold at the same time, I've decided to start researching into getting a generator that will power some appliances and my furnace. I have a Coleman echelon 9.c that was installed about a month...
Where is the heat anticipator setting for a coleman evcon furnace model dga2075800
I've replaced my furnace with a the echelon 8v during A/C season. The existing chronotherm T8600C1014 is about 20 yrs old. All was well during cooling season. In heating the blower off delay is not responding as programmed on the board. It is set for 90 sec. When stat drops the call for heat...
My friend has a Coleman generator model #544000, it needs work to get it working and I wondered if it would sell or what should we do with it?
My generator won't start. I used sta-bil fuel treatment and then stored it for 3 years. I drained the fuel out of the tank and carb bowl (it was dark yellow) and added fresh fuel. When I try to start it, nothing happens, I pull and pull until fuel comes out into the air cleaner. (flooded) What do I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
