 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Furnace lights, barely, then goes out!
The furnace seems to fire up fine, but within a couple seconds, the burners go out, and the igniter shuts down. The igniter is good, and I already took the sensor out and hit it with some steel wool. Still same thing! Any help would be appreciated!
|
||||
Check out some similar questions!
Hi,I have a concord 80 plus furnace installed in 2002... Everything is kicking on the fan turns on, the igniter ignites the gas , and a minute or so later the blower comes on... problem is the air is cool and barely blowing?? all vents are open correctly... cold air return is working fine... filter...
I have a GMNT-080-4B Some times I get a 3 blink light issue and then when it starts it has a flame roll back. Also I have to change the ignitor every year. Any help would be great
I have a 1973 wesco 20 srt electric furnace and since I switched out the thermstat it won't produce warm air and the blower motor doesn't turn off... what can I do to fix?
My electric furnace blows cold air ~ 60 seconds before putting out barely warm air. Any ideas on how to fix this? Does it need a delay? How do I do that? Thanks in advance, Jay
My electric furnace blows cold air ~ 60 seconds before putting out barely warm air. Any ideas on how to fix this? Does it need a delay? How do I do that? Thanks in advance, Jay
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
