 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
If a 150w multi-tap MH fixture was wired for 120v,can I change it to work at 208v after it was used at 120v?
Hi, I have a power drop to a power shed on a rural piece of land, 200 amps, and want to split from there taking one power cable to a cabin and another to a shop. It is 90 feet to the cabin and 230 feet to the shop. I am either going to do 100 amps to each, or 60 amps to the cabin and the rest...
I am trying to connect a subpanel in my garage so I can run my 71/2 hp 230v single phase air compressor. I live in a mobile home with a power pole and it has a single pole 20 amp breaker supplying the garage currently. The wire going to the garage is #10 600v copper. What type of preaker do I need...
Installing dimmer switch there is hole in wall but no box, their was a switch their attached to dry wall This is a modular home. Should I add a cut in box then put switch ? And there is three wires no 2 just tie all whites together and all blacks and grounds right?
What size earth cable comes into the house?
View more questions Search
|
