Why a/c unit trip the fuse when it goese on heat

Check out some similar questions!

My air cond split unit still trip [ 4 Answers ]

After I disconnect compressor wire,unit operation only indoor but unit still trip at ELCB...

Kenmore dryer won't heat.changed the heat element+thermal fuse.still won't heat [ 1 Answers ]

Kenmore dryer(110.96582100) is 15 years old. Worked great until it stopped heating. Actually it started taking longer and longer to dry the clothes. But now it won't heat at all. I've changed the heating element and thermal fuse. Could it be the thermistor or high limit thermostat? Don't want...

Heat Pump blows 5amp fuse when switching between defrost & back to heat. Them Heat work [ 3 Answers ]

I have a Carrier Heat Pump System. It’s about 5 years old and has functioned OK until this Christmas Eve. One problem is the condensing unit is not kicking back on after it goes into defrost mode. I found a 5AMP fuse blown in the attic unit and once replaced it functioned. At least for a day or two...

Live in a mobile home with intertherm heat and air unit the unit outside unit has bee [ 1 Answers ]

Live in mobile home with an intertherm unit outside unit is no longer running didn't know if it even needs to be running with the heat

Air Circuit Breaker Trip Unit malfunction [ 2 Answers ]

Masterpact M16H1 ACB, with STR38S Trip Unit. In=1600A. I'm aware that the trip unit may not function correctly while detecting currents below 20% of rated current. But my specific question is, could these conditions while causing the STR38S Trip Unit to malfunction, actually cause the unit to...

View more questions Search

Check out some similar questions!

Add your answer here.