 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Comfortmaker rpj ii fails to ignite
I can turn on the heater at the thermostat and the fan blower comes on. Periodically the electric glow rod (?) lights up but it does not light any gas in the three tubes (burners). I do not smell gas. There is gas going into the house as the gas fireplace and water heater works and I have verified that the manual gas valve is turned on to the central heater. However, no gas is getting to the burners or three tubes in the furnace. Approximately 4 years ago, the Honeywell SV9501 control valve was replaced. Please help! :(
|
||||
Check out some similar questions!
In auto mode the exhaust blower blows but the main blower does not. Occasionally, the heater would start in auto mode but now only works when blower is on - Heater then starts immediately. Rheem 80 Plus
For the last two nights (very cold weather) our Bryant Furnace appears to be attempting to start, fan kicks in and the burners ignite then it shuts off 2-3 seconds later this happens repeatedly. The first night (around 3 am) I noticed this I turned the heat off with the thermostat and left it for...
My Bryant Gas Furnace occasionally fails to ignite. When this happens, I can reset it by turning the switch by the furnace off and on. It will then ignite after sparking for 30 seconds or so. The furnace has a pilot that is on and becomes large when the thermostat directs it to, but after sparking...
My furnace was working yesterday and we did not turn it off, but it will not function today. I know there is electrical power at the unit; that there is gas supply; the filter is new; the inducer motor comes on when the thermostat is adjusted;but no flame appears. The inducer motor will remain...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
