 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Unvented gas fire pilot will not stay lit.
Tried to light the gas fireplace pilot for the winter. The pilot lights normally and remote control works properly for a few minutes. Then the pilot goes out. When attempting to relight the pilot the flame goes out when the pilot button is released no matter how long it is held down. The fireplace is made by superior fireplace company out of fullerton, CA and I cannot get any information about them. The thermo couple was replaced in 2007. What is the next step?
|
||||
Check out some similar questions!
My furnace pilot would not stay lite, changed the thermcouple but pilot would still not stay lite, i installed a new gas valve, now pilot will stay lite until the unit lites up the furnace unit will come on and pilot goes out and unit stays on for about 3 min and then i hear a click and the furnace...
The pilot light is on and it is in the upper 90's. The glass is radiating heat. Does the pilot light need to be kept on over the summer?
Ok I just finished installing a downflow furnace in my garage. The unit was new never installed before. The model is GNL100N16G1 manufactured by International Comfort Products Corperation. I finished the install and turned her on. She fired right up and ran perfect warming the garage to 65 degrees...
When I turn the furnace on the pilot flame comes on and the burner does not fire. The pilot will cycle on and off a few times and then quit. This is an itermittent problem That is becoming more frequent. The unit is only 3 years old. Thanks for any help.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
