 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heating problem
I have a York dual system model # P2MPD20M09601A, with digital thermostat. My setting is 72 degrees with automatic setting. The problem that I am experiencing is that the unit ignites for heat, and shortly after ( less than a minute ) shuts off. Please advise.
|
||||
|
||||
|
I have a York dual system model # P2MPD20M09601A, with digital thermostat. My setting is 72 degrees with automatic setting. The problem that I am experiencing is that the unit ignites for heat, and shortly after ( less than a minute ) shuts off. Please advise.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a 1995 cal spa model PS-5-B the GFI tripped when the heat came on and the low speed motor I finally got the GFI to stay on when I turn up the thermostat to turn heat on the indicator light goes on but not the low speed side of pump. The high speed side of pump works fine on switch...
We live in an apartment building and the individual water usage is measured by private water meters (mechanical). When the apartment was built, 2 years ago, some of the meters had been fitted the wrong way (in reverse). Yesterday a plumber attended to rectify 3 meters. My 2 neighbours meters were...
My heating unit comes on but will not stay on past 70 degrees and don't blow as hot as it usually do. Also if I set it to 80 degrees it still cuts off at 70 degrees. No matter what I set the thermostat at, 70 degrees is max.. At that point the unit shuts off. Once the house gets cool I have to cut...
My electric heating central unit is not heating in all places:(
I have a thermostat ( Maple /Chase) when I turn on the heat nothing is blowing what could be the problem??
View more questions Search
|
