Ask Experts Questions for FREE Help !
Ask
    Ruddunit's Avatar
    Ruddunit Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 21, 2012, 06:40 PM
    Heat Pump Dryer/Filter
    A contractor just installed my new 2-1/2 ton Ruud heat pump. He did not install the dryer/filter that came boxed and shipped within the wiring compartment of the heat pump. When asked why he did not install it he said the unit already had one internally and this one is only needed if the coolant line was opened in the future. Sounded very odd to me. Is he telling me thruth or cutting corners? It is not like manufacturers, especially Rheem, to be sending extra parts for the future.

    Thanks
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Oct 21, 2012, 06:47 PM
    He is either mistaken or is taking short cuts. The device installed in the outdoor unit is NOT a filter-dryer.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My heat pump recently started sounding like a dryer. [ 0 Answers ]

It is heating, but sounds like a dryer, tumbling wet clothes. It is making me very nervous, especially here at Christmas :(

Installed a honeywell pro6000 stat on a carrier heat pump, cooling mode is heat pump [ 2 Answers ]

Installed a honeywell pro6000 stat on a carrier heat pump, cooling mode is heat pump

Is a heat pump with emergency heat a multi stage heat pump [ 1 Answers ]

I am trying to replace the thermostat for my heat pump the one I've got seems to be running the emergency heat only. All wires were connected as they were in the old one. Is regular heat and emergency heat considered multi-stage? If so, I need another thermostat... please advise.

Pump won't lite after cleaning filter and inner filter [ 1 Answers ]

Filter was complet mush and guk, also in the pump I took out and cleaned the screen , all good now, I primed filter and pump but still would not ignite. Blnk blk blk, after 3 second hold button furnace attempts then must hold for 30 secs to reset from lockout. SO after many attemps, "does it every...

View more questions Search