 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a retaining wall separating the neighbor back yard to my garage. The retaining wall is about 7ft high and is made of solid concrete. The retaining wall attaches perpendicular with my neighbors retaining wall but I noticed retaining wall has about a 6" gap were the two retaining walls meet...
Hi - Poured concrete retaining wall at my property line (about 50 feet long)is leaning toward my neighbors yard. Wall is about 2 feet high, and holds back lawn on side of my house with less than ideal Drainage situation. I want to remove the concrete sidewalk that runs from front to side...
I need to repair a well house that has buckling cinder block walls. The well is below ground with a shed above it. The room is approximately 9' x 8' and 8' tall with cinder block walls and a concrete floor. The block did not have concrete poured in it when it was built, the blocks are beginning...
Planning to finishout a basement with stud walls on concrete floor. Planning to use Tapcon fasteners and treated 2x4 for bottom plate. Trying to protect for termites and moisture from the concrete. Thought about using a sill gasket. That would help the moisture but what about termites? I asked...
I hope you can help. I am pretty clueless about these things. I have a big serious retaining wall in the backyard and want to attach an 18 x 24 inch concrete decorative plaque to it. I am afraid of damaging it. Is there a way I can attach something this heavy without drilling? Thanks, Lissa
View more questions Search
|
