Ask Experts Questions for FREE Help !
Ask
    garysokolowski's Avatar
    garysokolowski Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 19, 2012, 09:07 AM
    Heil Gas Furnace Problems
    I have a Heil Model# NUG5100BFA1 , it operates and the heat shuts off at end of cycle, but the blower motor doesn't shut off.
    Does it need to shut off to begin another heat cycle?
    Even when I shut the switch off and turn it back on, the motor continues to run. Any ideas?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Oct 19, 2012, 09:17 AM
    1st I would check the thermostat to make sure its set on auto, not fan or fan only
    If that's no help look at thermostat wire and make sure there are no frays or shorted wires,, next would be the fan control
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to wire my greentek hrv to kicks on the furnace fan on low of a heil furnace? [ 0 Answers ]

How to wire my greentek hrv to kicks on the furnace fan on low of a heil furnace? I had a airconditioner installed in August and for some reason they unhook my hrv so now the hrv turns on but doesn't request the furnace fan to come on. So now it's not circulating the air in my house properly. I...

I have a heil 9000 furnace I turn the furnace on and nothing happens [ 0 Answers ]

I hear a hissing noise coming from the inducer motor and the pilot does not come on what can the issue be

Problems with ignition on Heil Furnaces [ 1 Answers ]

Having igniting problem. Just had a new gas valve(SV9500M 2682) installed, as old unit was not allowing gas flow to burners. However, now the pilot seems to fire randomly with different burner responses. I watch and see the burner in random order try to ignite all 4 tubes, but it seems like some...

Heil Furnace-Combustion fan comes on but furnace does not come on [ 12 Answers ]

I have a 10 year old Heil furnace. When the furnace tries to come on the combustion fan comes on but nothing happens after that. The pilot does not come on, no flames, nothing. I hired a service tech and he said that we need to change the gas valve since it faulty. Is there anything else I...

Heil blower problems [ 2 Answers ]

My sister has a Heil Comfortmaker 10. If the furnace has been off for awhile the blower motor works fine, but sometimes when the furnane kicks on the motor will only hum and when not blow even turned to on. I spinned the wheel but it still won't start. It will just set there and hum. The motor...

View more questions Search