 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Thermostat replacement for bryant heat pum[
I am looking for a non programmable heat pump thermostat to replace my old energy saving bryant thermostat model No.34427DP97 installed in 1978.
The bryant thermostat uses 8 wires. It controls the heatpump and AC and automatically switches to propane gas when outdoor temperature drops to 32 degrees. It has an emergency heat switch and red indicator light for the propane gas also. Can you recommend a replacement? Thank You |
||||
Check out some similar questions!
Trying to replace a Bryant heat pump thermostat with 8 wires connected with a Honeywell RTH3100C. Instruction guide says if W1, W2, and Y were connected, contact a HVAC tech. Honeywell customer service was no help. Any ideas?
This is the second thermostat I'm installing, which is sort of the heart of the problem. I installed the first one (a Rite Temp) about 18 months ago with a lot less trouble. Of course, I removed an older thermostat, so I was able to label the wires properly, etc. But suddenly the display on the...
I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...
We've been in this house for 25 years now and have had the same heater/ac/thermostat. Lately, I've been looking for ways to cut energy costs and so I bought a programmable thermostat (hunter #44550) based on good reviews. After I read the manual, I attempted to remove the cover plates to our...
Remove old thermostat and replace with honeywell model RTH3100C the old one has terminal O/B NEW one has this terminals are separated need to connect wire to O or B FOR HEAT PUMP PLEASE HELP
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
