Ask Experts Questions for FREE Help !
Ask
    tarobins's Avatar
    tarobins Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 14, 2012, 11:31 AM
    Put a 110 plug on a programmable fan motor
    Is it possible to put a 110v plug on a ge ecm programmable fan motor? Part no. 5sme39hl0300
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 14, 2012, 12:02 PM
    Those motors are designed to run off the circuit board.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I'm wiring a 208 plug from my 208 panel... 2 hots,nuetral, and ground to plug, right? [ 7 Answers ]

... same question as above...

7.3 diesel problems glow plug light will not come on .motor will not start. [ 1 Answers ]

Problem started when motor died going down road. After wigling wires under hood glow plug light came on and motor started.after motor died for a 5th time in 2 days I stopped the truck and it will not start again.motor turns over fine ,glow plug wait to start light will not come on.replaced glow...

What type of plug will I need to wire my air compressor 208-240 volt 15 amp motor [ 2 Answers ]

I just bought a 60 gallon air compressor and it didn't come with a plug. I need to know what type of plug I'm going to need to wire to it. It just has 2 connections (1 black 1 white). What type of plug do I buy to hook up, and where can I get one? The motor is 208-240 volts 15 amps.

Can an A/C motor's reversing plug be replaced [ 2 Answers ]

Can the reversing plug for an A/C condenser fan motor be replaced or do I need to replace the entire motor? Thanks for the help.

View more questions Search