Ask Experts Questions for FREE Help !
Ask
    Will_U_Help_Me's Avatar
    Will_U_Help_Me Posts: 5, Reputation: 1
    New Member
     
    #1

    Oct 13, 2012, 05:10 PM
    Furnace issues
    I cleaned my furnace three days ago, in the process a couple wires were accidentally disconnected and a red light is flahsing. I can't get my blower fan to turn and the red light to stop flashing. What can I do before calling a costly repair person?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #2

    Oct 13, 2012, 07:11 PM
    Hook the wires back up where they were hooked. If you aren't sure where they go, we will need very detailed description of the loose wires and the controls they go to. Actually, if you can post some clear pics of the wires and furnace controls, we should be able to get you hooked up.
    Will_U_Help_Me's Avatar
    Will_U_Help_Me Posts: 5, Reputation: 1
    New Member
     
    #3

    Oct 13, 2012, 08:27 PM
    I hooked all the wires according to what I remember and according to what previous responder suggested. We both had the same solution. Matter of fact, I went a step further to redisconnect everything and take my blower apart and oil it. The same ending resulted, no blower. I am getting really irritated now.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace issues [ 0 Answers ]

My gas furnace lights and runs for a few minutes then shuts off, it has no indicator lights. And I can't find a thermocouple. It has a high temp limit which looks like a small disk on the end of two leads, it has high resistance when cold and low resistance when I heat it up.

Furnace Issues [ 1 Answers ]

I replaced a diesel furnace with a gas furnace ( which I converted to propane). The propane gets to the gas valve but I can't get the pilot to light. I also installed a new digital thermastat I'm wondering if this has any thing to do with it not working. I guess I'm just looking for some trouble...

Furnace issues [ 2 Answers ]

I have a bryant furnace with a light switch connected to it and no fire and no heat blowing only cold air. By flipping the switch will that ignite my furnace?

Gas Furnace Humidity Issues [ 1 Answers ]

I have a gas furnace off a 1 bedroom apt. Im the top floor so the furnace chimney goes right out the roof. On days when there is high humidity or right when it rains, Sometimes the carbon monoxide detector will go off. Something I read mentioned that the humidity in the air might be causing...

Furnace Issues [ 3 Answers ]

Hi, we have lived in our home a little over two years and every year we hear the same loud noise when our furnace kicks on "boom" . We have been told that everything is fine with the furnace but for some reason this sound does not make me feel safe. Does anybody know what causes this sound and how...


View more questions Search