Ask Experts Questions for FREE Help !
Ask
    bobmass44's Avatar
    bobmass44 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 12, 2012, 08:24 PM
    Whirlpool washer unbalance light load
    I have a whirlpool washer. All of a sudden a light load would go unbalanced and even an empty load wouldn't be balanced. It's much more sensitive with loads even light 2 or 3 items loads.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Oct 13, 2012, 12:10 AM
    You have a broken spring or spring support. You will have to look at it to see why it is doing this. Frequently, this will happen when the spring hole rusts out. Drill another hole and put the spring back on or attach a piece of metal for another support.
    Here is a manual: https://dl.dropbox.com/u/8010163/Und...c%20washer.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool top load washer not draining [ 0 Answers ]

It washes just fine. But does not drain. It goes through the motions but only a trickle of water is coming out. Spin also works. Though right now it is taking roughly 2 days to do one small load. Help!

Whirlpool top load washer [ 0 Answers ]

Washing machine agitates for 2 minutes, then stops

Effect unbalance load on transformer? [ 7 Answers ]

What is effect unbalance load on transformer? For Distribution Transformer 150/20 kV 60 MVA Ynynd1 with solid earthing. There is typical setting recommendation for unbalance load??

Trying to open top load Whirlpool Washer? [ 2 Answers ]

I am trying to remove the lid switch in a washing machine.. Part # lsr8444lqo & I am trying to pry up the top with putty knife & pry bar & it will not open? Please help me out? Seabee Erik:(

View more questions Search