Ask Experts Questions for FREE Help !
Ask
    eyefixthngs's Avatar
    eyefixthngs Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 11, 2012, 03:22 PM
    Transition from threaded galvenized pipe to cpvc
    What can I use to make the transition from galvenized to cpvc pipes?
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Oct 11, 2012, 03:31 PM
    U can get a PVC transition at any big box store. Get a store associate to help u. U will need to know the size of pipe u are going from and size of pipe u are going to.

    Chuck
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Oct 11, 2012, 03:31 PM
    Depending on the threads on the galvanized pipe you will use either a male or female PVC adapter. More questions? I'm as close as a click, Good luck, Tom
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #4

    Oct 11, 2012, 05:08 PM
    In my experience you want to purchase brass or SS CPVC transition fittings... available only at a local plumbing supply store... ;)

    See images below...

    Mark
    Attached Images
      
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #5

    Oct 12, 2012, 06:34 AM
    Marks fitting is the latest. Use his, Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Difference between cpvc pipe and ppr pipe [ 0 Answers ]

What is difference between cpvc pipe and ppr pipe , rate and quality wise ?

PPr vs cpvc pipe- which pipe is better for plumbing & why? [ 0 Answers ]

PPR vs CPVC pipe, which better for plumbing & why?

Galvanized pipe to either Copper/CPVC pipe [ 14 Answers ]

I had a leak in my cold water feed which happens to be galvanized pipe. It was between 2 floors and I cut out the affected section. I am going to replace the cut out section with either copper or CPVC. But how does one connect unthreaded galvanized pipe to the after mentioned pipes? I don't know if...

View more questions Search