Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Do I need a neutral to feed meter base 480 volts?
[ 3 Answers ]
Need to know if a neutral is needed to feed a meter base?
Do single pole breakers hook black to breaker and neutral & grd to bonded neutral bar
[ 6 Answers ]
I have an Eaton Cutler-Hammer meter/breaker box. (MB816B200BTS-FLCH) I want to run a 20 amp circuit (underground wire) from this box through existing underground conduit to a receptacle for a dishwasher. This run would be app. 15' to 20' and from my main house panel it would be 40' to 50'. All...
Stratmando, thanks I don't have 120 volts between Hot and Neutral. I have 120 volts
[ 2 Answers ]
Stratmando, thanks I don't have 120 volts between Hot and Neutral. I have 120 volts between hot and ground Also have 120 volts between Neutral and ground How far in the wiring do these types of problems reach into the wall?
Receptacles hot to neutral show no volts, hot to ground show 120v
[ 1 Answers ]
Replaced four receptacles in parallel, checked for loose wires. Checked the gfi breaker and 120v leaving the breaker. Tested all receptacles with voltmeter showing 120v between hot and ground, shows no voltage between hot and neutral. None of the receptacles work. Got any ideas?
120 volts between utility supplied neutral and ground?
[ 1 Answers ]
I'm troubling shooting the lighting and the entrance to our community and have run into a problem. I thought I was just going to replace some bulbs, maybe a ballast, but things have gotten worst quickly. Turns out that with the main circuit off I still have 120 between the neutral and ground. I... View more questions Search
|