Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hunter Switch/Housing Assembly
[ 4 Answers ]
We just moved into a home with a Hunter ceiling fan, we found a broken light kit in the garage. Husband bought what we believed was a light kit assembly that was made of plastic. The piece is what is under the light fixture/bulbs & just above the glass globe. It is part of the part where the...
Trying to install a new hunter ceiling fan and a new hunter switch fan and dimmer in
[ 1 Answers ]
Trying to install a new hunter ceiling fan and a new hunter switch fan and dimmer in one... I can get the light to work on the dimmer and or the fan and light on the dimmer but not the fan to work on the fan switch... I don't know where the blue wire coming out of the switch goes ...
Fan works light assembly does not.
[ 4 Answers ]
I just recently purchased a house. There is a ceiling fan in the living room. The fan works fine but the light assembly does not work for some reason. At my previous home I had a ceiling fan which I brought to my new house and installed into the dining area. I hooked it up, black to black, white to...
Hunter Stafford fan, Hunter remote 27157 and two wall switches
[ 3 Answers ]
From the ceiling is a tan, a red, a black and a ground that go to two switches on the wall. The fan has a black, a black with white, a ground and a white. The remote has a black, a red, two whites and a black with white stripe. Which do you connect to which? Thanks.
Hunter Fan Model 23282 - Wire Hunter Control Model 27182
[ 3 Answers ]
I have a new house that came pre wired for a light/fan. I connected my Hunter Fan (Model 23282) to the ceiling wiring as such FAN/Ceiling Wiring White/White Black/Black Black-White/Red Green/Green I believe I wired the celing correctly. View more questions Search
|