Ask Experts Questions for FREE Help !
Ask
    BLACKHAWK1's Avatar
    BLACKHAWK1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 5, 2012, 01:02 PM
    Janitrol furnaces problems
    Janitrol furnace pilot starts the furnace but doesn't stay lit. then cycle starts all over. What's the problem?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Oct 5, 2012, 02:15 PM
    Sorry, I don't know what you mean by "starts the furnace". More information would be helpful. Does the furnace have a pilot which stays lit all the time? Do you have a model number of the furnace & aprox. Age?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #3

    Oct 5, 2012, 08:53 PM
    Please give the info requested by Grady. It sounds like the main burners are lighting then going out over and over again? May be as simple as a dirty flame sensor.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Does mixing brands of air conditioners and furnaces cause any problems such as a air [ 1 Answers ]

Are 90% furnaces in 1992 as Efficience as furnaces now? [ 0 Answers ]

I have a armstrong ultra furnce 90% installed in 1992 are the new furnaces with same rating anymore Efficience now?

Furnaces [ 0 Answers ]

I am trying to install a white rodgers 90-113 fan control center on a Lennox GS18 furnace to add a/c. Im just a little confused on the wiring do I need 2 relays or can I just use the one it came with to control the low and high speeds on the blower?

Problems with ignition on Heil Furnaces [ 1 Answers ]

Having igniting problem. Just had a new gas valve(SV9500M 2682) installed, as old unit was not allowing gas flow to burners. However, now the pilot seems to fire randomly with different burner responses. I watch and see the burner in random order try to ignite all 4 tubes, but it seems like some...

Janitrol furnace problems [ 13 Answers ]

I have a Janitrol furnace that is 10 yrs old. It hasn't put out near the force of air as it used to, and now it cycles out and doesn't bring the temp up to the thermostat temp. I have to turn the thermostat off and back on to get it to run more than once in awhile. It does do better if I take...

View more questions Search