 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
My wiring is all out of place need skidmatic a pic of how all the wires go even therostat and ac and gas vaulve shutoff please
Trying to replace the fan motor 1/2 hp 115 v the fan combo center is honey well 8003 I believe, I try to replace it but end up burning the new motor it all came on the 4x4 metal box next to the transformer and relay I may have cross wire the wrong way the service box switch wires were connected but...
Hello, I have an older 80s model Magic Chef furnace - G83-75D-5. The furnace worked fine all last winter. I put in a new air filter in prep of winterizing and now the unit will not come on. The paperwork says to be sure the door is replaced correctly due to the safety interlock switch... I have...
I have an Ultra 97 gas fired heater made by Magic Chef. I assume its about 15-18 years old. When the heater kicks on, the only thing that happens is that the blower starts running but the ignitor does not ignite. There are 2 flat cylinder type switches when you open up the door. If you tap on...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
