Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Delicate cycle only works
[ 5 Answers ]
I replaced the ccu on my Kenmore Elite HE3t and now only the delicate cycle works. Any suggestions?
Whirlpool Estate Washer not going to next cycle. Works great if I manually cycle it.
[ 0 Answers ]
The water level is correct. Manually changing the Washer from the initial wash/agitate cycle to the rinse/spin cycle works fine. However, I must also manually advance to each subsequent cycle.
Whirlpool LSR9434PQ0 start cycle just hums but spin cycle it works perfectly
[ 1 Answers ]
My Whirlpool washer model# LSR9434PQ0 will just hum when you try and start a wash cycle. If you rotate the timer to a spin cycle, it will work fine. I've looked at all of the wire harnesses and connections and there is no sign of a surge burn or a short. Any help would be great. I'm in the...
I am a bit confused how a Refrigeration Cycle works?
[ 1 Answers ]
This is a question I have and I am not sure how I am supposed to figure Low side saturation temperature, total superheat exiting the evaporator etc.. R-22 - Refrigerant Low side pressure = 68.5 psig High side pressure = 210.8 psig Discharge line temp @ compressor = 150 deg F Liquid line...
Washing machine only works in spin cycle
[ 4 Answers ]
I have an old Kenmore 80 Washer and nothing works, but the spin-cycle. Many posts say that it's the Water inlet valve, but I don't want to spend $30-$40 to change it if it's not the right part. If it's the Water inlet valve, I figured if I filled the washer up with water the washing machine... View more questions Search
|