 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I'm trying to make this old Magic Chef furnace work in my garage. I got it and the Fan Control Center was broken, laying inside unwired. I have no wiring diagram for this unit but the M# is G76-7502 C2-5. I need help wiring the fan control center and the fan limit switch to power. I bought a new...
Trying to replace the fan motor 1/2 hp 115 v the fan combo center is honey well 8003 I believe, I try to replace it but end up burning the new motor it all came on the 4x4 metal box next to the transformer and relay I may have cross wire the wrong way the service box switch wires were connected but...
I have a ducane oil fired furnace, During the winter my burner was giving me problems so I replaced it.. Now that its summer I knew I had to mess around with the wiring Because I only tied in R/W from the tstat to the primmary for heat.. Come to find out the Beckett AFG I installed is not matching...
Hello, I need help!! I have a White-Rodgers/Steveco 90113 Fan Control Center with a SPDT relay. I need to know how to wire it, I have a thermostate with the red and green wires running to the fan control center, all I need to do is run a single stage fan on my Ducane furnace so the blower will...
Hi, I have an oil forced air furnace, with the fan controlled by a Honeywell L4064 fan limit control. The fan itself is capable of two speeds. I would like to add a fan control centre so that I can control the fan from a switch, hopefully able to select speeds. I gather adding a White-Rogers...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
